It is currently Sat May 25, 2013 9:46 pm

View unanswered posts | View active topics


Board index » Autodesk Inventor Discussion » Autodesk Inventor Discussion

All times are UTC





Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Previous topic | Next topic 
Author Message
sotiris
 Post subject: Tips for spiral creation
PostPosted: Mon Mar 05, 2012 6:23 pm 
Offline
MCAD Contributer

Joined: 28 Jul 2006
Posts: 32
Country: Greece
State: Non US/CAN Resident
CAD System: Inventor
Does anyone have an idea in order to create the spiral as mention in the picture.
How to create a spiral that the path is an arc?


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

Share on FacebookShare on TwitterShare on DiggShare on DeliciousShare on TumblrShare on Google+
Top
 Profile  
 
Roach
PostPosted: Mon Mar 05, 2012 7:23 pm 
Offline
MCAD Regular
User avatar

Joined: 19 Jan 2007
Posts: 306
Country: Canada
State: Saskatchewan
CAD System: Inventor
You might have to fudge it by making one revolution of a spiral and use a circular pattern to make it look right.

See attached part.


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

_________________
If at first you don't succeed, then you're about average.
Top
 Profile  
 
Inv_kaos
PostPosted: Tue Mar 06, 2012 5:05 am 
Offline
MCAD Expert
User avatar

Joined: 31 Oct 2007
Posts: 1002
Country: Australia
State: Non US/CAN Resident
CAD System: Inventor
Create a part with a straight coil then use the bend part tool.

_________________
Stew
"Oompa Loompas of science" - Sheldon Cooper
I thought I was wrong once but I was mistaken
Top
 Profile  
 
Inv_kaos
PostPosted: Tue Mar 06, 2012 6:27 am 
Offline
MCAD Expert
User avatar

Joined: 31 Oct 2007
Posts: 1002
Country: Australia
State: Non US/CAN Resident
CAD System: Inventor
Sample file attached. Drag down the EOP to use.


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

_________________
Stew
"Oompa Loompas of science" - Sheldon Cooper
I thought I was wrong once but I was mistaken
Top
 Profile  
 
Roach
PostPosted: Tue Mar 06, 2012 1:46 pm 
Offline
MCAD Regular
User avatar

Joined: 19 Jan 2007
Posts: 306
Country: Canada
State: Saskatchewan
CAD System: Inventor
Inv_kaos wrote:
Create a part with a straight coil then use the bend part tool.


Well that is far more elegant than my solution. Do this! :thumbsup:

_________________
If at first you don't succeed, then you're about average.
Top
 Profile  
 
sotiris
PostPosted: Wed Mar 07, 2012 7:13 pm 
Offline
MCAD Contributer

Joined: 28 Jul 2006
Posts: 32
Country: Greece
State: Non US/CAN Resident
CAD System: Inventor
I forgot to told you that i am using Inventor 2010, so i can not open the file.
Is it easy to describe the feature that you are using in order to try it.
Top
 Profile  
 
Inv_kaos
PostPosted: Thu Mar 08, 2012 5:02 am 
Offline
MCAD Expert
User avatar

Joined: 31 Oct 2007
Posts: 1002
Country: Australia
State: Non US/CAN Resident
CAD System: Inventor
Roach wrote:
Well that is far more elegant than my solution.

But not as creative :D

_________________
Stew
"Oompa Loompas of science" - Sheldon Cooper
I thought I was wrong once but I was mistaken
Top
 Profile  
 
Inv_kaos
PostPosted: Thu Mar 08, 2012 5:09 am 
Offline
MCAD Expert
User avatar

Joined: 31 Oct 2007
Posts: 1002
Country: Australia
State: Non US/CAN Resident
CAD System: Inventor
Picture of features


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

_________________
Stew
"Oompa Loompas of science" - Sheldon Cooper
I thought I was wrong once but I was mistaken
Top
 Profile  
 
sotiris
PostPosted: Thu Mar 08, 2012 6:22 pm 
Offline
MCAD Contributer

Joined: 28 Jul 2006
Posts: 32
Country: Greece
State: Non US/CAN Resident
CAD System: Inventor
Thanks for the support!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Autodesk Inventor Discussion » Autodesk Inventor Discussion

All times are UTC


Who is online

Users browsing this forum: Google [Bot] and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
POWERED_BY