It is currently Sun May 26, 2013 12:34 am

View unanswered posts | View active topics


Board index » Autodesk Inventor Discussion » Autodesk Inventor Addins

All times are UTC





Post new topic Reply to topic  Page 2 of 4
  [ 50 posts ]  Go to page Previous  1, 2, 3, 4  Next
  Print view Previous topic | Next topic 
Author Message
Ren
PostPosted: Wed Jun 09, 2010 8:00 pm 
Offline
MCAD Contributer

Joined: 27 May 2006
Posts: 67
Country: Denmark
State: Non US/CAN Resident
CAD System: Inventor
Barnesmetal wrote:
Thanks again for the help! The ini file did the trick with the bend lines :thumbsup: Your program just knocked about five minutes off my electrical/junction boxes I have automated through Inventor....Thanks!

Any word on getting this to work with iParts? I just finished one with 36 different configurations and had to "manually" save each one individually. Beggers can't be choosers though! Haha...


Hi Nick
I have try on ipart it seems to work. Is your iparts Sheet metal parts ?
Do you have a sample I can work with. You can post the sample in PM,
and give me more detail of your workflow.

Ren


Share on FacebookShare on TwitterShare on DiggShare on DeliciousShare on TumblrShare on Google+
Top
 Profile  
 
nomutt
PostPosted: Wed Jun 09, 2010 8:36 pm 
Offline
MCAD Contributer
User avatar

Joined: 10 Sep 2007
Posts: 116
Country: France
State: Non US/CAN Resident
CAD System: Inventor
Hi Ren

_________________
Christophe S....t
Dev. App. Eng.
Top
 Profile  
 
Ren
PostPosted: Wed Jun 09, 2010 9:50 pm 
Offline
MCAD Contributer

Joined: 27 May 2006
Posts: 67
Country: Denmark
State: Non US/CAN Resident
CAD System: Inventor
nomutt wrote:
Hi Ren
Top
 Profile  
 
Ren
PostPosted: Thu Jun 10, 2010 3:26 pm 
Offline
MCAD Contributer

Joined: 27 May 2006
Posts: 67
Country: Denmark
State: Non US/CAN Resident
CAD System: Inventor
Barnesmetal wrote:
Thanks again for the help! The ini file did the trick with the bend lines :thumbsup: Your program just knocked about five minutes off my electrical/junction boxes I have automated through Inventor....Thanks!
time
Any word on getting this to work with iParts? I just finished one with 36 different configurations and had to "manually" save each one individually. Beggers can't be choosers though! Haha...


Hi Nick
Have you try to set the "Auto export On save sheet metal part" this will export (dxf) each you save a sheet metal part
Filenaming : If you don't want to use the partname, you can use the property value, see in the help file
see the attach file.


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

Top
 Profile  
 
fishermanfritz
PostPosted: Thu Jun 10, 2010 4:36 pm 
Offline
MCAD Contributer

Joined: 05 Jan 2005
Posts: 121
Country: Canada
State: Manitoba
CAD System: Inventor
Just checking, are you working on make it work for Inv. 2010?
Top
 Profile  
 
Barnesmetal
PostPosted: Thu Jun 10, 2010 4:58 pm 
Offline
MCAD Contributer

Joined: 02 Jun 2010
Posts: 27
Country: United States
State: NorthCarolina
CAD System: Inventor
I'm using Inventor 2011

_________________
Nick Martin
@barnesmetal
http://www.barnesmetal.com
Flickr Photostream
http://www.flickr.com/photos/7550204@N03/
Top
 Profile  
 
Ren
PostPosted: Sun Jun 13, 2010 6:33 pm 
Offline
MCAD Contributer

Joined: 27 May 2006
Posts: 67
Country: Denmark
State: Non US/CAN Resident
CAD System: Inventor
Hi Thanks for all your comments

1.) I have solved the problem with Inventor 2010 installation

2.) Now with Language Translation.
iFlatpatternExport is using Google Translation Api and use the same language as Inventor.
If Internet is not connected, iFlatpatternExport will use default English.
Note: For other Language than English.
If you don't want to use the translation set the "Use English as default" as checked.
The help file is a Html file, and will open in Internet explorer. You can use the Google translate function (Google Toolbar)

I know, I have writen ("I don't want to spending hours on translation." )

new add in is oploadet V1.2 :wink:
note: the Rar file is split in to files.

Ren
Top
 Profile  
 
fishermanfritz
PostPosted: Mon Jun 14, 2010 12:52 pm 
Offline
MCAD Contributer

Joined: 05 Jan 2005
Posts: 121
Country: Canada
State: Manitoba
CAD System: Inventor
Morning, Thanks for making it compatible with Inv. 2010. I just have one problem to report, it dosen't seem to be using the ini file that I specify. The ini file that we have has only the outer and inner profile lines checked but when I save a part I always get the bend line and tangent lines as well. Thanks again for this addin It is going to save us a ton of time.
Top
 Profile  
 
Ren
PostPosted: Tue Jun 15, 2010 3:45 pm 
Offline
MCAD Contributer

Joined: 27 May 2006
Posts: 67
Country: Denmark
State: Non US/CAN Resident
CAD System: Inventor
Hi Thanks for all your comments

New add in is oploadet V1.3 :wink:
The Problem with Inventor 2010 dosen't use the ini file is solved.
note: the Rar file is split in to files.

Ren
Top
 Profile  
 
fishermanfritz
PostPosted: Tue Jun 15, 2010 6:12 pm 
Offline
MCAD Contributer

Joined: 05 Jan 2005
Posts: 121
Country: Canada
State: Manitoba
CAD System: Inventor
Excellent work. it all works great now, Thanks.
Top
 Profile  
 
Antti L.
PostPosted: Thu Feb 10, 2011 1:07 pm 
Offline
MCAD Lurker

Joined: 10 Feb 2011
Posts: 1
Country: Finland
State: Non US/CAN Resident
CAD System: Inventor
Hi Rene J,

I have problem with layer line types. I have changed IV_BEND_DOWN and IV_BEND line types to be etc. "Chain" but in the dxf file bend lines are still "Continuous". Is this bug or have i missed something?

In my settings files are saved in same dxf folder, but if I press manual putton then message box tells it's saved on same folder as orginal file. Dxf is in a correct "dxf" folder, but this message box message is wrong . :wink:

br,
Antti L.
Top
 Profile  
 
EyeTech
PostPosted: Sun Feb 13, 2011 4:13 pm 
Offline
MCAD Lurker

Joined: 13 Feb 2011
Posts: 2
Country: United States
State: California
CAD System: Solidworks
Hello Ren
Top
 Profile  
 
YoniGaia
PostPosted: Thu Jun 16, 2011 2:14 pm 
Offline
MCAD Lurker

Joined: 16 Jun 2011
Posts: 3
Country: Israel
State: Non US/CAN Resident
CAD System: Inventor
Hi Ren
Top
 Profile  
 
Ren
PostPosted: Sun Jun 19, 2011 12:47 pm 
Offline
MCAD Contributer

Joined: 27 May 2006
Posts: 67
Country: Denmark
State: Non US/CAN Resident
CAD System: Inventor
YoniGaia wrote:
Hi Ren
Top
 Profile  
 
YoniGaia
PostPosted: Mon Oct 31, 2011 11:23 am 
Offline
MCAD Lurker

Joined: 16 Jun 2011
Posts: 3
Country: Israel
State: Non US/CAN Resident
CAD System: Inventor
Hi Ren
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 4
  [ 50 posts ]  Go to page Previous  1, 2, 3, 4  Next

Board index » Autodesk Inventor Discussion » Autodesk Inventor Addins

All times are UTC


Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
POWERED_BY