It is currently Fri May 24, 2013 8:58 pm

View unanswered posts | View active topics


Board index » Autodesk Inventor Discussion » Autodesk Inventor Addins

All times are UTC





Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
ntye
PostPosted: Fri Jul 29, 2011 6:40 am 
Offline
MCAD Lurker

Joined: 26 Jun 2011
Posts: 11
Country: United States
State: California
CAD System: Inventor
Attachment:
PropertiesWindowImg1.jpg

This addin is for Inventor 2012.

It is a Dockable Window where iProperties can be viewed or edited. Via a txt file (included), you may choose which properties to display. Custom property creation is also supported; just enter the custom property name in the txt file the same as any other property.

This is the first version of this addin, so any feedback or suggestions would be appreciated. :)

Nelson


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

Share on FacebookShare on TwitterShare on DiggShare on DeliciousShare on TumblrShare on Google+
Top
 Profile  
 
gmassart
PostPosted: Fri Jul 29, 2011 8:42 am 
Offline
MCAD Contributer

Joined: 10 May 2010
Posts: 55
Country: France
State: Non US/CAN Resident
CAD System: Inventor
That's a really good idea.
Sorry to ask : is it possible to get it for 2011 :)

_________________
Affival SAS - Cored Wire and Wire Feeder for Steel Plant and other Industry
Elficast - Cored Wire and Wire Feeder for Foundry
Top
 Profile  
 
iDS!
PostPosted: Fri Jul 29, 2011 11:58 am 
Offline
MCAD Guru
User avatar

Joined: 07 Jun 2005
Posts: 2546
Country: United States
State: Florida
CAD System: Inventor
...you my friend are a blessing! ...could you do the same with Fx? ...heck I'd pay for that!

_________________
Steve Robbins
Inventor Design Solutions & Innovations
"I believe in being an innovator " - Walt Disney
@_iDSi
Top
 Profile  
 
Troy Grose
PostPosted: Fri Jul 29, 2011 12:15 pm 
Offline
MCAD Addict
User avatar

Joined: 16 Nov 2005
Posts: 513
Country: Canada
State: Ontario
CAD System: Inventor
Just an FYI this has been out for a few years with iTools, plus A LOT more.

See my screenshot


You do not have the required permissions to view the files attached to this post. You must LOGIN or REGISTER to view these files.

Top
 Profile  
 
iDS!
PostPosted: Fri Jul 29, 2011 12:20 pm 
Offline
MCAD Guru
User avatar

Joined: 07 Jun 2005
Posts: 2546
Country: United States
State: Florida
CAD System: Inventor
...hmmm iTools? ...and where might one find these iTools?

_________________
Steve Robbins
Inventor Design Solutions & Innovations
"I believe in being an innovator " - Walt Disney
@_iDSi
Top
 Profile  
 
gmassart
PostPosted: Fri Jul 29, 2011 12:30 pm 
Offline
MCAD Contributer

Joined: 10 May 2010
Posts: 55
Country: France
State: Non US/CAN Resident
CAD System: Inventor
I found it : http://www.nestor.no/
Problem is that it is written in norway language, not so easy to understand...
It is a pay-addin, which seems good...

_________________
Affival SAS - Cored Wire and Wire Feeder for Steel Plant and other Industry
Elficast - Cored Wire and Wire Feeder for Foundry
Top
 Profile  
 
iDS!
PostPosted: Fri Jul 29, 2011 12:32 pm 
Offline
MCAD Guru
User avatar

Joined: 07 Jun 2005
Posts: 2546
Country: United States
State: Florida
CAD System: Inventor
cool :) ...but all you need to do is view thsi with Chrome Browser and it will translate it for you ;)

:( ...no Fx docking yet... <sigh>

_________________
Steve Robbins
Inventor Design Solutions & Innovations
"I believe in being an innovator " - Walt Disney
@_iDSi
Top
 Profile  
 
SeanDotson
PostPosted: Fri Jul 29, 2011 12:38 pm 
Offline
Forum Admin
User avatar

Joined: 29 Jan 2004
Posts: 13448
Country: United States
State: Florida
CAD System: Inventor
Hmmm, iTools looks suspiciously a bit like iPropWiz...

_________________
Sean Dotson, PE
RND Automation & Engineering
Free 30 day trial of iPropWiz v5
Follow @seandotson & @mcadforums & @rndautomationon Twitter
Top
 Profile  
 
Troy Grose
PostPosted: Fri Jul 29, 2011 12:56 pm 
Offline
MCAD Addict
User avatar

Joined: 16 Nov 2005
Posts: 513
Country: Canada
State: Ontario
CAD System: Inventor
SeanDotson wrote:
Hmmm, iTools looks suspiciously a bit like iPropWiz...


Well it is and it isn't. It just a different beast. I would say it was more like Yippee Pro2 was as far as the property editor goes. But is has way more added on mini-addins inside the program than Yippee Pro2.

I wouldn't say the iProperty functions are as indepth as iPropWiz, but they are sufficient to do everything I need to do.
Top
 Profile  
 
ntye
PostPosted: Fri Jul 29, 2011 7:31 pm 
Offline
MCAD Lurker

Joined: 26 Jun 2011
Posts: 11
Country: United States
State: California
CAD System: Inventor
gmassart wrote:
That's a really good idea.
Sorry to ask : is it possible to get it for 2011 :)


You actually should be able to just register the dll file for Inv 2011, and disregard the .addin file. The method of addin installation changed between 2011 & 2012, but the dll should still be compatible.
I can't think of any reason why that wouldn't work. Let me know if it doesn't though.
Top
 Profile  
 
ntye
PostPosted: Fri Jul 29, 2011 7:35 pm 
Offline
MCAD Lurker

Joined: 26 Jun 2011
Posts: 11
Country: United States
State: California
CAD System: Inventor
iDS! wrote:
...you my friend are a blessing! ...could you do the same with Fx? ...heck I'd pay for that!


:)
I don't know what all that would involve, but i'll look into it... Might be possible!!
Top
 Profile  
 
brendanh
PostPosted: Fri Aug 05, 2011 12:20 am 
Offline
MCAD Contributer
User avatar

Joined: 29 Apr 2010
Posts: 58
Country: Australia
State: Non US/CAN Resident
CAD System: Inventor
Did anyone get this working in 2011?

_________________
Brendan Henderson
CAD Manager/Owner
____________________________________
From BLH Drafting Services
Mobile 0428 509212
Phone 03-5436 1094
Web http://www.blh.com.au
Twitter @BLHDrafting
____________________________________
Windows 7 x64 -64 GB Ram, Intel Xeon E5-1620 @ 3.6 GHz
ATI FirePro V5900 2 GB, 180 GB SSD & 1 TB HDD
Inv R2013 PDS SP1.1
Vault 2013 Workgroup Update 1
Top
 Profile  
 
gmassart
PostPosted: Tue Aug 09, 2011 9:06 am 
Offline
MCAD Contributer

Joined: 10 May 2010
Posts: 55
Country: France
State: Non US/CAN Resident
CAD System: Inventor
brendanh wrote:
Did anyone get this working in 2011?

I copy the file into the 2011 folders.
I do not know where to copy the data file
Inventor 2011 loads, but no trace of the addin into the list of addin charged...

_________________
Affival SAS - Cored Wire and Wire Feeder for Steel Plant and other Industry
Elficast - Cored Wire and Wire Feeder for Foundry
Top
 Profile  
 
Fraz
PostPosted: Fri Sep 16, 2011 10:07 am 
Offline
MCAD Lurker

Joined: 15 Sep 2011
Posts: 3
Country: United Kingdom
State: Non US/CAN Resident
CAD System: Inventor
ntye wrote:
gmassart wrote:
That's a really good idea.
Sorry to ask : is it possible to get it for 2011 :)


You actually should be able to just register the dll file for Inv 2011, and disregard the .addin file. The method of addin installation changed between 2011 & 2012, but the dll should still be compatible.
I can't think of any reason why that wouldn't work. Let me know if it doesn't though.


I was trying to install your addin for 2011 but have run into some problems.

When I tried to register the dll file using (regsvr32 "C:\Program Files\Autodesk\Inventor 2011\Bin\PropertiesWindow1.dll")

I get the following message:

regsvr32 "C:\Program Files\Autodesk\Inventor 2011\Bin\PropertiesWindow1.dll"was loaded, but the DllRegisterServer entry point was not found. The file can not be registered.

Any ideas what I'm doing wrong?
Top
 Profile  
 
mcgyvr
PostPosted: Fri Oct 07, 2011 4:45 pm 
Offline
MCAD Contributer

Joined: 19 Oct 2005
Posts: 150
Is there the ability to have a dropdown list for possible values for custom properties. For example I want a "Finish" custom iproperty and want to select between red, white or blue paint?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 19 posts ]  Go to page 1, 2  Next

Board index » Autodesk Inventor Discussion » Autodesk Inventor Addins

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
POWERED_BY