ADD-IN iFlatpatternExport

René J · **Posted:** Wed, 09 Jun 2010 15:00:04 +0000

Barnesmetal wrote:

Thanks again for the help! The ini file did the trick with the bend lines :thumbsup:

Your program just knocked about five minutes off my electrical/junction boxes I have automated through Inventor....Thanks!

Any word on getting this to work with iParts? I just finished one with 36 different configurations and had to "manually" save each one individually. Beggers can't be choosers though! Haha...

Hi Nick
I have try on ipart it seems to work. Is your iparts Sheet metal parts ?
Do you have a sample I can work with. You can post the sample in PM,
and give me more detail of your workflow.

René J

nomutt · **Posted:** Wed, 09 Jun 2010 15:36:14 +0000

Hi René J,

Your interventions in this forum often help me. If you want it, i'm ready to help you for translation into french language.

René J · **Posted:** Wed, 09 Jun 2010 16:50:55 +0000

nomutt wrote:

Hi René J,

Your interventions in this forum often help me. If you want it, i'm ready to help you for translation into french language.

I'm afraid this will be a neverending story, translation into french then.... Chinese in google translation there is 132 language
where do I start and stop. I don't want to spending hours on translation.

René J · **Posted:** Thu, 10 Jun 2010 10:26:09 +0000

Barnesmetal wrote:

Thanks again for the help! The ini file did the trick with the bend lines :thumbsup:

Your program just knocked about five minutes off my electrical/junction boxes I have automated through Inventor....Thanks!
time
Any word on getting this to work with iParts? I just finished one with 36 different configurations and had to "manually" save each one individually. Beggers can't be choosers though! Haha...

Hi Nick
Have you try to set the "Auto export On save sheet metal part" this will export (dxf) each you save a sheet metal part
Filenaming : If you don't want to use the partname, you can use the property value, see in the help file
see the attach file.

fishermanfritz · **Posted:** Thu, 10 Jun 2010 11:36:00 +0000

Just checking, are you working on make it work for Inv. 2010?

Barnesmetal · **Posted:** Thu, 10 Jun 2010 11:58:33 +0000

I'm using Inventor 2011

René J · **Posted:** Sun, 13 Jun 2010 13:33:08 +0000

Hi Thanks for all your comments

1.) I have solved the problem with Inventor 2010 installation

2.) Now with Language Translation.
iFlatpatternExport is using Google Translation Api and use the same language as Inventor.
If Internet is not connected, iFlatpatternExport will use default English.
Note: For other Language than English.
If you don't want to use the translation set the "Use English as default" as checked.
The help file is a Html file, and will open in Internet explorer. You can use the Google translate function (Google Toolbar)

I know, I have writen ("I don't want to spending hours on translation." )

new add in is oploadet V1.2 :wink:

note: the Rar file is split in to files.

René J

fishermanfritz · **Posted:** Mon, 14 Jun 2010 07:52:10 +0000

Morning, Thanks for making it compatible with Inv. 2010. I just have one problem to report, it dosen't seem to be using the ini file that I specify. The ini file that we have has only the outer and inner profile lines checked but when I save a part I always get the bend line and tangent lines as well. Thanks again for this addin It is going to save us a ton of time.

René J · **Posted:** Tue, 15 Jun 2010 10:45:37 +0000

Hi Thanks for all your comments

New add in is oploadet V1.3 :wink:

The Problem with Inventor 2010 dosen't use the ini file is solved.
note: the Rar file is split in to files.

René J

fishermanfritz · **Posted:** Tue, 15 Jun 2010 13:12:14 +0000

Excellent work. it all works great now, Thanks.

And enter to win a 3DConnexion Space Naviagtor 3D Mouse

ADD-IN iFlatpatternExport

Who is online