Hello!

I'm doing a minor projekt for school which involves a short survey about different CAD softwares and while looking for apropriate "subjects" I stumbled upon these forums.
Hopefully there's some kind CAD-users out there willing to spend a minute or two answering a few questions.

I would be very grateful for anyone who put aside som time to help me out with this!

I must apologize beforehand for english is not my first language and the wording might appear abit sloppy.

If I happen to break a forum rule by posting here I once again apologize and you may remove the thread and or ban/me altough i mean no harm, just looking for some insight into the industry.

Anyway.. the survey can be found at this link: www.surveymonkey.com/s/8SKGB2W

I completed the survey. Good luck with your project!

Done as well. FYI your first question will not allow an "other" reply w/o also checking a box...

_________________
Sean Dotson, PE
RND Automation & Engineering
Free 30 day trial of iPropWiz v5
Follow @seandotson & @mcadforums & @rndautomationon Twitter

Done

_________________
Jas

Inventor 2013 Product Design Suite
HP 8730W Elitebook
Win7 x64
Quadro FX2700M

I just took the survey and question 1 still does not let you type in an 'other' software unless you check on of the other choices. FWIW I wanted to only select Inventor, but it is not one of your choices, despite the fact that some lessor used CAD programs are.

Hello Natte,

This seems interesting. Can you share your work once you are done with it? I'm interested in finding the information you have gathered and learn from it. I think there are also some members here interested in your work.

_________________
Cad Drafting Services New York

I have completed it. Good Luck.

DONE !!!!!!